YASKAWA MP2300S - Page 113

3.2 Basic Module Connections
3.2.4 Ethernet Connector Details
3-22
 Caution
High frequency wave noise from other devices in the installation environment may cause error in communications using 100
Base-TX or MECHATROLINK connections. When constructing a system, use MP2300S protective measures to avoid the
influence of high frequency wave noise as follows:
1Wiring
Wire Ethernet or MECHATROLINK cables so that they are well-separated from other cable systems such as the main circuit
or power lines.
2 Communication system (100Base-TX)
• Communicate data to a remote device through TCP/IP communication.
• If necessary, increase the number of communication retries.
3 Attach a ferrite core.
Attach a ferrite core in the manner described below:
Ethernet : Attach it to the communication port side and the external equipment side of the MP2300S main
unit.
MECHATROLINK : Attach it only to the communication port side of the MP2300S main unit.
(We will provide a standard cable with core. Model: JEPMC-W6003-
)
Note: Recommended ferrite core
Model: Manufacturer
E04SR301334
Seiwa Electric Mfg. Co., Ltd
HUB
MPE720
MP2300S
&%
4.;
176
'VJGTPGV
&%
8
.+0-
/
0V
MP2300S
;#5-#9#
6'56
4&;
#./
/6:
64:
470
'44
$#6
+2
59

59

/10
%0()
+06
572
5612
$#66'4;
㪧㪦㪮㪜㪩
'
M-I/II
+0+6
01
01
'
6'56
YASKAWA SERVOPACK
200V
SGDS-01A12A
SW1
CHARGE
C
N
3
A/B
C
N
1
C
N
2
C
N
4
L1
L2
L2C
L1C
B1/
B2
U
V
W
C
N
6
SERVOPACK
Core
Core
Core
Option
100Base-TX
(straight cable)
Servomotor
Other station