6.2 Communication with Other MP Series
6.2.4 When the MP2300S Acts as Master (ladder program which uses a MSG-SND function)
6-54
7. Create a ladder program containing a message transmit function (MSG-SND).
An example of a ladder program example for transmitting messages from the MP2300S side follows:
Message transmit function (MSG-SND)
Required for transmitting messages. A message transmission is carried out by describing and executing this mes-
sage transmit function in a ladder program.
Fig. 6.9 MPE720 Module Configuration Definition Window
MSG SND
&$
&$
&#
&$
&$
&$
Communication device
Protocol type
Circuit number = 1
Communication buffer channel number
Parameter list start address
=DA00000
Execute
Abort
Dev-Typ
Pro-Typ
Cir-No
Ch-No
Param
Busy
Complete
Error
Communication device
Circuit number = 1
To Next Page
Loading...
