ABB RED650 - Boolean 16 to Integer Conversion B16 I; Identification; Functionality; Function Block

• OFF is a boolean signal, fixed to OFF (boolean 0) value
• ON is a boolean signal, fixed to ON (boolean 1) value
• INTZERO is an integer number, fixed to integer value 0
• INTONE is an integer number, fixed to integer value 1
• INTALONE is an integer value FFFF (hex)
• REALZERO is a floating point real number, fixed to 0.0 value
• STRNULL is a string, fixed to an empty string (null) value
• ZEROSMPL is a channel index, fixed to 0 value
• GRP_OFF is a group signal, fixed to 0 value
14.10 Boolean 16 to Integer conversion B16I
SEMOD175715-1 v1
14.10.1 Identification
SEMOD175721-2 v2
Function description IEC 61850
identification
IEC 60617
identification
ANSI/IEEE C37.2
device number
Boolean 16 to integer conversion B16I - -
14.10.2 Functionality
SEMOD175725-4 v5
Boolean to integer conversion, 16 bit (B16I) is used to transform a set of 16
boolean (logical) signals into an integer.
14.10.3 Function block
SEMOD175798-5 v4
IEC07000128-2-en.vsd
B16I
BLOCK
IN1
IN2
IN3
IN4
IN5
IN6
IN7
IN8
IN9
IN10
IN11
IN12
IN13
IN14
IN15
IN16
OUT
IEC07000128 V2 EN-US
Figure 242: B16I function block
1MRK 505 394-UEN A Section 14
Logic
Line differential protection RED650 2.2 IEC 473
Technical manual