18.4.13.3 Function block
GUID-690FD935-5344-4D6F-AB94-F9FD5FD35B23 v1
IEC16000036-1-en.vsdx
GOOSEXLNRCV
BLOCK
^SRCBEH
^SRCLOC
^S RCBLKOPN
^SRCBLKCLS
^SRCPOS
^S RCOPCNT
^S RCBLK
^SRCSTSELD
^SRCOPRCVD
^S RCOPOK
^SRCEEHLT
^SRCOPCAP
^BEH
BEH _VALID
^LOC
LOC_VAL ID
^BLKOPN
BLKOPN_VALID
^BLKCLS
BLKCLS_VAL ID
^POSVAL
POSVAL_VALID
^OPCNT
OPCNT_VALID
^BLK
BLK_VAL ID
^S TSELD
STSELD_VALID
^OPRCVD
OPRCVD_VALID
^OPOK
OPOK_VAL ID
^EEHEALTH
EEHEALTH_VALID
^OPCAP
OPCAP_VAL ID
COMMVALID
TEST
IEC16000036 V1 EN-US
Figure 326: GOOSEXLNRCV function block
18.4.13.4 Signals
GUID-2DC54788-86AF-4B4B-8E57-A89E30F0C433 v1
Except for the BLOCK input, the rest of the inputs of this GOOSE
function block are used for GOOSE connections. These
connections are visible and possible to make only if Easy GOOSE
engineering is enabled. For instructions on how to enable Easy
GOOSE engineering in PCM600, refer to the Engineering Manual.
PID-6643-INPUTSIGNALS v3
Table 482: GOOSEXLNRCV Input signals
Name
Type Default Description
BLOCK BOOLEAN 0 Block of output signals
SRCBEH INTEGER 0 Source to behaviour output
SRCLOC BOOLEAN 0 Source to local control behaviour output
SRCBLKOPN BOOLEAN 0 Source to block opening
SRCBLKCLS BOOLEAN 0 Source to block closing
SRCPOS INTEGER 0 Source to switch position
SRCOPCNT INTEGER 0 Source to operation counter
SRCBLK BOOLEAN 0 Source to dynamic blocking of function described
by the LN
SRCSTSELD BOOLEAN 0 Source to the controllable data is in the status
"selected”
Table continues on next page
Section 18 1MRK 505 394-UEN A
Station communication
664 Line differential protection RED650 2.2 IEC
Technical manual
To Next Page
Loading...
