ABB RED650 - Dimensions; Case with Rear Cover

Quantity Rated value
Amplitude modulated
– low level
– high level
1-3 Vpp
3 x low level, max 9 Vpp
Supported formats
IRIG-B 00x, IRIG-B 12x
Accuracy +/-10μs for IRIG-B 00x and +/-100μs for IRIG-B 12x
Input impedance 100 k ohm
Optical connector:
Optical connector IRIG-B Type ST
Type of fibre 62.5/125 μm multimode fibre
Supported formats IRIG-B 00x
Accuracy +/- 1μs
22.3 Dimensions
IP11490-1 v3
22.3.1 Case with rear cover
SEMOD53199-1 v1
M11985-110 v4
IEC05000501 V2 EN-US
Figure 390: Case with rear cover
Section 22 1MRK 505 394-UEN A
IED hardware
846 Line differential protection RED650 2.2 IEC
Technical manual