ABB RED650 - Signals

15.1.4 Signals
PID-6713-INPUTSIGNALS v3
Table 341: CVMMXN Input signals
Name
Type Default Description
I3P GROUP
SIGNAL
- Group signal for current input
U3P GROUP
SIGNAL
- Group signal for voltage input
PID-6713-OUTPUTSIGNALS v3
Table 342: CVMMXN Output signals
Name Type Description
S REAL Apparent Power magnitude of deadband value
S_RANGE INTEGER Apparent Power range
P_INST REAL Active Power
P REAL Active Power magnitude of deadband value
P_RANGE INTEGER Active Power range
Q_INST REAL Reactive Power
Q REAL Reactive Power magnitude of deadband value
Q_RANGE INTEGER Reactive Power range
PF REAL Power Factor magnitude of deadband value
PF_RANGE INTEGER Power Factor range
ILAG BOOLEAN Current is lagging voltage
ILEAD BOOLEAN Current is leading voltage
U REAL Calculated voltage magnitude of deadband value
U_RANGE INTEGER Calculated voltage range
I REAL Calculated current magnitude of deadband value
I_RANGE INTEGER Calculated current range
F REAL System frequency magnitude of deadband value
F_RANGE INTEGER System frequency range
PID-6735-INPUTSIGNALS v3
Table 343: CMMXU Input signals
Name
Type Default Description
I3P GROUP
SIGNAL
- Group signal for current input
1MRK 505 394-UEN A Section 15
Monitoring
Line differential protection RED650 2.2 IEC 501
Technical manual