ABB RED650 - Page 52

IEC 61850 or
function name
ANSI Function description Line differential
RED650 (A11)
MST1TCP,
MST2TCP,
MST3TCP,
MST4TCP
DNP3.0 for TCP/IP communication protocol 1
DNPFREC DNP3.0 fault records for TCP/IP and EIA-485 communication protocol 1
IEC 61850-8-1 IEC 61850 1
GOOSEINTLKRCV Horizontal communication via GOOSE for interlocking 59
GOOSEBINRCV GOOSE binary receive 16
GOOSEDPRCV GOOSE function block to receive a double point value 64
GOOSEINTRCV GOOSE function block to receive an integer value 32
GOOSEMVRCV GOOSE function block to receive a measurand value 60
GOOSESPRCV GOOSE function block to receive a single point value 64
GOOSEXLNRCV GOOSE function block to receive a switching device 3
MULTICMDRCV/
MULTICMDSND
Multiple command and transmit 60/10
OPTICAL103 IEC 60870-5-103 Optical serial communication 1
RS485103 IEC 60870-5-103 serial communication for RS485 1
AGSAL Generic security application component 1
LD0LLN0 IEC 61850 LD0 LLN0 1
SYSLLN0 IEC 61850 SYS LLN0 1
LPHD Physical device information 1
PCMACCS IED configuration protocol 1
SECALARM Component for mapping security events on protocols such as DNP3
and IEC103
1
FSTACCS Field service tool access 1
IEC 61850-9-2 Process bus communication, 4 merging units 1-P31
ACTIVLOG Activity logging 1
ALTRK Service tracking 1
PRP IEC 62439-3 Parallel redundancy protocol 1-P23
HSR IEC 62439-3 High-availability seamless redundancy 1-P24
PTP Precision time protocol 1
FRONTSTATUS Access point diagnostic for front Ethernet port 1
SCHLCCH Access point diagnostic for non-redundant Ethernet port 4
RCHLCCH Access point diagnostic for redundant Ethernet ports 2
DHCP DHCP configuration for front access point 1
QUALEXP IEC 61850 quality expander 32
Remote communication
Table continues on next page
Section 2 1MRK 505 394-UEN A
Available functions
46 Line differential protection RED650 2.2 IEC
Technical manual