Acteon X-MIND prime 3D ceph - Page 163

Service Manual – Troubleshooting
SERVICE MANUAL • X-MIND prime 3D • (19) • 11/2019 • NXMPEN080A
161
764
mA analog feedback out of range
9.2.7.13
765
Filament analog feedback out of range
9.2.7.13
766
Generator board reset due to a brown out
9.2.7.13
767
Generator board reset due to low voltage
detection
9.2.7.13
768
Generator board reset due to a watchdog
timeout
9.2.7.13
769
Generator board reset due to a stack overflow
9.2.7.13
770
Mismatch between generator board (A2) and
MCU board (A1) types (2D / 3D)
9.2.7.14
Keyboard
Code
Error description
Reference
paragraph
850
One or more keycodes are pressed
9.2.8.1
852
Button >0< pressed during movements
9.2.8.2
PC software user interface (GUI)
Code
Error description
Reference
paragraph
1201
Setup menu: write data EEPROM failure
9.2.9.1
1202
Unexpected value detected by the software
9.2.9.2
1203
Software allocation failure
9.2.9.1
1204
Exposure parameters failure
9.2.9.2
1205
Image buffer allocation failure
9.2.9.2
PC driver interface (ASP)
Code
Error description
Reference
paragraph
1401
Sensor connection lost during exam
9.2.10.1
1402
Sensor communication failure
9.2.10.2
1403
Software watchdog error
9.2.10.3
1404
Sensor does not detect X-rays during exam
9.2.10.4
1405
Sensor frame lost during exam
9.2.10.1