Agilent Technologies n5181a - Delete:state; Delete:uflt; Delete[:Name]; Free[:All]

84 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
System Commands
Memory Subsystem (:MEMory)
:MEMory:DELete:SEQ
This command deletes all sequence files.
Key Entry Delete All Sequence Files
:DELete:STATe
Supported All Models
:MEMory:DELete:STATe
This command deletes all state files.
Key Entry Delete All Models State Files
:DELete:UFLT
Supported All Models
:MEMory:DELete:UFLT
This command deletes all user- flatness correction files.
Key Entry Delete All UFLT Files
:DELete[:NAME]
Supported All Models
:MEMory:DELete[:NAME] "<file name>"
This command clears the user file system of "<file name>".
Key Entry Delete File
Remarks Refer to “File Name Variables” on page 12 for information on the file name syntax.
When deleting a waveform (WFM1) file from memory, the marker file and file
header, associated with the waveform file, will also be deleted.
:FREE[:ALL]
Supported All Models
:MEMory:FREE[:ALL]?
This command returns the number of bytes left in the non- volatile user file system.
Key Entry All
:LOAD:LIST
Supported All Models
:MEMory:LOAD:LIST "<file name>"