Agilent Technologies n5181a - Filesystem:storage:type:auto; Idn

Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 103
System Commands
System Subsystem (:SYSTem)
Example
:SYST:FIL:STOR:TYPE EXT
The preceding example selects the external USB port as the location for non- volatile file storage on
the signal generator.
:FILesystem:STORage:TYPE:AUTO
Supported All
:SYSTem:FILesystem:STORage:TYPE:AUTO ON|OFF|1|0
:SYSTem:FILesystem:STORage:TYPE:AUTO?
This command enables the signal generator to auto- detect when the external media is connected.
When AUTO (ON|1) is selected, the file system uses the external media, if available. When the
external media is removed, the file system uses the internal media.
Enables you to select how the signal generator's non- volatile user file system behaves when you
attach an external media device to the front panel USB port. For more information, refer to the
signal generator’s softkey Help. For more information on non- volatile storage media settings, refer to
“:FILesystem:STORage:EXTernal” on page 102, “:FILesystem:STORage:EXTernal:PATH” on page 102 and
“:FILesystem:STORage:TYPE” on page 102.
Key Entry Storage Type Int Ext Auto
Example
:SYST:FIL:STOR:TYPE:AUTO ON
The preceding example selects AUTomatic as the non- volatile storage setting and the signal generator
will detect if the external USB port has a memory storage device connected.
*RST
Remarks When the external media is removed, the external non- volatile user file system
effectively does not exist.
:IDN
Supported All
:SYSTem:IDN "string"
This command modifies the identification string that the *IDN? query returns. Sending an empty
string sets the query output of *IDN? to its factory shipped setting. The maximum string length is 72
characters.
Remarks Modification of the *IDN? query output enables the signal generator to identify
itself as another signal generator when used as a replacement.
The display diagnostic information, shown by pressing the
Diagnostic Info softkey, is not affected by this command.