Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 105
System Commands
System Subsystem (:SYSTem)
:LICense:EXTernal:LIST
Supported All
:SYSTem:LICense:EXTernal:LIST?
This query provides a listing of the current licenses for external software installed on the signal
generator.
:LICense:LIST
Supported All
:SYSTem:LICense:LIST?
This query provides a listing of the current licenses installed on the signal generator.
:LICense:REMove
Supported All
:SYSTem:LICense:REMove <license_line>
This command removes a single license line.
Example
To remove a license line:
:SYST:LIC:REM "FEATURE 403 aspk 0 permanent 0 389D66FB107E9B02
HOSTID=N5182A,US00000068"
The preceding example removes a license "FEATURE 403 aspk 0 permanent 0 389D66FB107E9B02
HOSTID=N5182A,US00000068", from the signal generator.
Remarks To remove multiple license lines: Repeat the process for removing a single license
for each license line to be removed.
:PDOWn
Supported All
:SYSTem:PDOWn
This command turns off the instrument.
:PON:TYPE
Supported All
:SYSTem:PON:TYPE PRESet|LAST|USER
:SYSTem:PON:TYPE?
This command sets the defined conditions for the signal generator at power on.
PRESet This choice sets the conditions to factory- or user- defined as determined by the
choice for the preset type.
To Next Page
Loading...
