Agilent Technologies n5181a - Command Mapping

Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 239
SCPI Compatibility
8656B, 8657A/B/D/J Programming Codes
Non-Compatible Codes
Command Mapping
When using the 8656B, 8657A/B/D/J- compatible programming codes, the N5181A/82A internally maps
these codes to an equivalent SCPI response. In addition, the modulation source selections for the
8656B, 8657A/B/D/J differ from those available in the N5181A/82A and therefore, are mapped to a
S4 Modulation Source Off Refer to, “S4 (Modulation Source Off)” on page 242.
S5 DC FM Refer to, “S5 (DC FM)” on page 242.
UP Step Up No equivalent SCPI command
UV Unit used with the power
command
UV
VL Unit used with the power
command
V
0- 9 Numerals 0−90–9
–Minus Sign–
. Decimal Point .
%
d
Unit used with the
modulation command
PCT
a.Program codes are either upper or lower case.
b.Increment Set is implemented for frequency (FR) and amplitude (AP) only.
c.This code is used with the NADC, PDC, and PHS digital modulation.
d.Either PC or % can be used.
e.The source of reverse power must be removed.
8656B, 8657A/B/D/J Codes Description
HI HI ALC
LO LO ALC
R0 Standby
R1 On
8656B,
8657A/B/D/J
Codes
a
Description Equivalent SCPI Command Syntax