136 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
Analog Modulation Commands
Pulse Modulation Subsystem–Option UNU and UNW([:SOURce])
:PULM:STATe
Supported All with Option UNU
[:SOURce]:PULM:STATe ON|OFF|1|0
[:SOURce]:PULM:STATe?
This command enables or disables pulse modulation for the selected path.
When pulse modulation is enabled, the PULSE annunciator appears on the signal generator’s
front- panel display.
Example
:PULM:STAT ON
The preceding example enables the pulse modulation.
*RST 0
Key Entry Pulse Off On
To Next Page
Loading...
