Agilent Technologies n5181a - Flatness:store; [:State]

Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 23
Basic Function Commands
Correction Subsystem ([:SOURce]:CORRection)
:FLATness:STORe
Supported All Models
[:SOURce]:CORRection:FLATness:STORe "<file name>"
This command stores the current user- flatness correction data to a file named by the
:CORRection:FLATness:STORe command. The directory path is implied in the command and need not
be specified in the "<file name>" variable.
Key Entry Store To File
Remarks For information on file name syntax, refer to “File Name Variables” on page 12.
[:STATe]
Supported All Models
[:SOURce]:CORRection[:STATe] ON|OFF|1|0
[:SOURce]:CORRection[:STATe]?
This command enables or disables the user- flatness corrections.
*RST 0
Key Entry Flatness Off On