Agilent Technologies n5181a - LARB Subsystem-Option 651;652;654 ([:Source]:Radio:larb); [:State]

164 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
Component Test Digital Commands
LARB Subsystem–Option 651/652/654 ([:SOURce]:RADio:LARB)
LARB Subsystem–Option 651/652/654 ([:SOURce]:RADio:LARB)
[:STATe]
Supported N5182A with Option 651/652/654
[:SOURce]:RADio[1]:LARB[:STATe] ON|OFF|1|0
[:SOURce]:RADio[1]:LARB[:STATe]?
This command enables or disables the waveform sweep function, when the signal generator is in list
sweep mode.
*RST 0
Key Entry Waveform Off On
Remarks The Sweep Type List Step softkey must be set to List for this command to function.