102 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
System Commands
System Subsystem (:SYSTem)
:FILesystem:STORage:EXTernal
Supported All
:SYSTem:FILesystem:STORage:EXTernal?
This query checks to see if the external USB port is actively being used for data storage and retrieval
on the signal generator. A returned value of 1 means the external USB media is being used for data
storage and retrieval. For more information on non- volatile storage media settings, refer to
“:FILesystem:STORage:EXTernal:PATH” on page 102, “:FILesystem:STORage:TYPE” on page 102 and
“:FILesystem:STORage:TYPE:AUTO” on page 103
:FILesystem:STORage:EXTernal:PATH
Supported All
:SYSTem:FILesystem:STORage:EXTernal:PATH <"external media root path">
:SYSTem:FILesystem:STORage:EXTernal:PATH?
This command selects the directory storage path on the external media. For more information, refer
to the signal generator’s softkey Help. For more information on non- volatile storage media settings,
refer to “:FILesystem:STORage:EXTernal” on page 102, “:FILesystem:STORage:TYPE” on page 102 and
“:FILesystem:STORage:TYPE:AUTO” on page 103.
Remarks When reading and writing files from or to the external media, different memory
subsystem file types are marked by having a particular extender on the filename.
Refer to “External Memory Path Options” table on page 102.
:FILesystem:STORage:TYPE
Supported All
:SYSTem:FILesystem:STORage:TYPE INTernal|EXTernal
:SYSTem:FILesystem:STORage:TYPE?
This command selects the non- volatile storage location on the signal generator. For more information
on non- volatile storage media settings, refer to “:FILesystem:STORage:EXTernal” on page 102,
“:FILesystem:STORage:EXTernal:PATH” on page 102 and “:FILesystem:STORage:TYPE:AUTO” on
page 103.
Key Entry Storage Type Int Ext Auto
External Memory
Path Options
Extender Memory Subsystem
.waveform NVWFM
.markers NVMKR
.header NVHDR
.state STATE
.list LIST
.uflat UFLAT
.seq SEQ
All others BIN
To Next Page
Loading...
