Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 75
System Commands
IEEE 488.2 Common Commands
*ESR?
Supported All Models
CAUTION This is a destructive read. The data in the register is latched until it is queried. Once
queried, the data is cleared.
*ESR?
The Standard Event Status Register (ESR) query returns the value of the Standard Event Status
Register.
Remarks Refer to the Programming Guide for more information.
*IDN?
Supported All Models
*IDN?
The Identification (IDN) query outputs an identifying string. The response will show the following
information:
<company name>, <model number>, <serial number>, <firmware revision>
Key Entry Diagnostic Info
Remarks The identification information can be modified. Refer to :SYST:IDN on page 103
for more information.
*OPC
Supported All Models
*OPC
The Operation Complete (OPC) command sets bit 0 in the Standard Event Status Register when all
pending operations have finished.
To Next Page
Loading...
