86 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
System Commands
Memory Subsystem (:MEMory)
The return data will be in the following form:
<mem used>,<mem free>{,"<file listing>"}
The signal generator will return the two memory usage parameters and as many file listings as there
are files in the specified file system. Each file listing will be in the following format:
"<file name,file type,file size>"
Remarks Refer to “MSUS (Mass Storage Unit Specifier) Variable” on page 15 for information
on the use of the "<msus>" variable.
:COPY
Supported All Models
:MMEMory:COPY "<file name>","<file name>"
This command makes a duplicate of the requested file.
Key Entry Copy File
Remarks Refer to “File Name Variables” on page 12 for information on the file name syntax.
When copying a waveform file from volatile to non- volatile memory, the marker
file and file header, associated with the waveform file, will automatically be copied
at the same time.
:DATA
Supported All Models
:MMEMory:DATA "<file name>",<datablock>
:MMEMory:DATA? "<file name>"
This command loads <datablock> into the memory location "<file name>".
The query returns the <datablock> associated with the "<file name>".
Remarks Refer to “File Name Variables” on page 12 for information on the file name syntax.
:DELete:NVWFm
Supported N5182A with Option 651/652/654
:MMEMory:DELete:NVWFm
This command clears the user file system of all non- volatile arbitrary waveform files.
Key Entry Delete All NVWFM Files
:DELete:WFM
Supported N5182A with Option 651/652/654
Key Entry Binary List State User Flatness
Seq WFM1 NVMKR NVWFM
To Next Page
Loading...
