64 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
System Commands
Communication Subsystem (:SYSTem:COMMunicate)
Key Entry LAN Config
Remarks The SCPI query returns the current setting, not the saved setting.
:LAN:DOMain
Supported All
:SYSTem:COMMunicate:LAN:DOMain <string>
:SYSTem:COMMunicate:LAN:DOMain?
This command defines the domain name of the signal generator’s DNS server.
This entry defines the DNS server for the signal generator LAN connection.
Key Entry Domain Name
Remarks The SCPI query returns the current setting, not the saved setting.
:LAN:DNS:DYNamic
Supported All
:SYSTem:COMMunicate:LAN:DNS:DYNamic ON|OFF|1|0
:SYSTem:COMMunicate:LAN:DNS:DYNamic?
This command turns dynamic Domain Name System (DNS) on/off.
Key Entry Dynamic DNS Naming Off On
Remarks The SCPI query returns the current setting, not the saved setting.
:LAN:DNS:OVERride
Supported All
:SYSTem:COMMunicate:LAN:DNS:OVERride ON|OFF|1|0
:SYSTem:COMMunicate:LAN:DNS:OVERride?
This command enables you to override the DNS server that is returned by the DHCP server. The LAN
configuration type must be set to Auto or DHCP to use this feature.
Key Entry DNS Server Override Off On
Remarks The SCPI query returns the current setting, not the saved setting.
If DNS Service Override is set to On, the DNS server setting defined with the DNS
Server softkey is used.
If DNS Service Override is set to Off, the setting returned by the DHCP Server is
used.
:LAN:DNS[:SERVer]
Supported All
:SYSTem:COMMunicate:LAN:DNS[:SERVer] <ipstring>
This command defines the IP address of the signal generator DNS server.
To Next Page
Loading...
