Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 113
System Commands
System Subsystem (:SYSTem)
Key Entry Screen Saver Off On
Remarks The setting enabled by this command is not affected by signal generator power- on,
preset, or *RST.
:TIME
Supported All
:SYSTem:TIME <hour>,<minute>,<second>
:SYSTem:TIME?
This command sets the time displayed in the lower right area of the signal generator’s display.
Key Entry Time/Date
:VERSion
Supported All
:SYSTem:VERSion?
This command returns the SCPI version number with which the signal generator complies.
Range <hour>: 0–23 <minute>: 0–59 <second>: 0–59
To Next Page
Loading...
