88 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
System Commands
Memory Subsystem (:MEMory)
to change or delete file header information on files that are not currently running
but are stored in either the internal or external non- volatile memory (Example:
:MMEMory:HEADer:DESCription "NVWFM:file_name",”example_file_name”).
The header description is limited to 32 characters. Refer to “File Name Variables”
on page 12 for information on the file name syntax.
:LOAD:LIST
Supported All
:MMEMory:LOAD:LIST "<file name>"
This command loads a List sweep file.
Key Entry Load From Selected File
:MOVE
Supported All
:MMEMory:MOVE "<src_file>","<dest_file>"
This command renames the requested file in the memory catalog.
Key Entry Rename File
Remarks Refer to “File Name Variables” on page 12 for information on the file name syntax.
:STORe:LIST
Supported All
:MMEMory:STORe:LIST "<file name>"
This command stores the current list sweep data to a file.
Key Entry Store To File
To Next Page
Loading...
