Agilent Technologies n5181a - Lan:ip; Lan:keep:timeout; Lan:keep[:State]; Lan:monitor

66 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
System Commands
Communication Subsystem (:SYSTem:COMMunicate)
:LAN:IP
Supported All
:SYSTem:COMMunicate:LAN:IP "<ipstring>"
:SYSTem:COMMunicate:LAN:IP?
This command sets the signal generator’s local area network (LAN) internet protocol (IP) address for
your IP network connection.
Key Entry IP Address
:LAN:KEEP:TIMeout
Supported All
:SYSTem:COMMunicate:LAN:KEEP:TIMeout <value>
:SYSTem:COMMunicate:LAN:KEEP:TIMeout?
This command sets the length of time for the TCP Keep Alive setting.
Range 0 sec to 3600 sec
Key Entry TCP Keep Alive Timeout
:LAN:KEEP[:STATe]
Supported All
:SYSTem:COMMunicate:LAN:KEEP[:STATe] ON|OFF|1|0
:SYSTem:COMMunicate:LAN:KEEP[:STATe]?
This command enables or disables the TCP Keep Alive feature.
Key Entry TCP Keep Alive Off On
:LAN:MONitor
Supported All
:SYSTem:COMMunicate:LAN:MONitor ON|OFF|1|0
:SYSTem:COMMunicate:LAN:MONitor?
This command enables or disables the LAN connection monitoring.
Key Entry Connection Monitoring Off On
:LAN:NBIos
Supported All
:SYSTem:COMMunicate:LAN:NBIos ON|OFF|1|0
:SYSTem:COMMunicate:LAN:NBIos?
This command enables or disables the RFC NETBIOS naming feature.