Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 189
SCPI Compatibility
E4428C/38C Compatible Commands
:SYSTem:COMMunicate:LAN:GATeway? ✓
:SYSTem:COMMunicate:LAN:HOSTname <string> ✓
:SYSTem:COMMunicate:LAN:HOSTname? ✓
:SYSTem:COMMunicate:LAN:IP <ipstring> ✓
:SYSTem:COMMunicate:LAN:IP? ✓
:SYSTem:COMMunicate:LAN:SUBNet <ipstring> ✓
:SYSTem:COMMunicate:LAN:SUBNet? ✓
:SYSTem:COMMunicate:PMETer:ADDRess <value> ✓ Command accepted without error but does
nothing.
:SYSTem:COMMunicate:PMETer:ADDRess? ✓ Command accepted without error but does
nothing.
:SYSTem:COMMunicate:PMETer:CHANnel A|B ✓ Command accepted without error but does
nothing.
:SYSTem:COMMunicate:PMETer:CHANnel? ✓ Command accepted without error but does
nothing.
:SYSTem:COMMunicate:PMETer:IDN
E4418B|E4419B|E4416A|E4417A
✓ Command accepted without error but does
nothing.
:SYSTem:COMMunicate:PMETer:IDN? ✓ Command accepted without error but does
nothing.
:SYSTem:COMMunicate:PMETer:TIMEout <num>[<time
suffix>]
✓ Command accepted without error but does
nothing.
:SYSTem:COMMunicate:PMETer:TIMEout? ✓ Command accepted without error but does
nothing.
:SYSTem:COMMunicate:SERial:BAUD <number> –
:SYSTem:COMMunicate:SERial:BAUD? –
:SYSTem:COMMunicate:SERial:ECHO ON|OFF –
:SYSTem:COMMunicate:SERial:ECHO? –
:SYSTem:COMMunicate:SERial:RESet –
Table 6-2 E4428C/38C Program Codes and Equivalent SCPI Sequences
3 = Supported by Agilent MXG
– = Not supported by Agilent MXG
N51xxA
Remarks
To Next Page
Loading...
