Agilent Technologies n5181a - Page 238

222 Agilent N5181A/82A MXG Signal Generators SCPI Command Reference
SCPI Compatibility
E4428C/38C Compatible Commands
[:SOURce]:RADio[1]:ARB:NOISe:CN <-100dB -
100dB {0dB}>
[:SOURce]:RADio[1]:ARB:NOISe:CN?
✓
[:SOURce]:RADio[1]:ARB:NOISe[:STATe]
ON|{OFF}|1|0
[:SOURce]:RADio[1]:ARB:NOISe[:STATe]?
✓
[:SOURce]:RADio[1]:ARB:REFerence:EXTernal:FREQ
uency <value>
[:SOURce]:RADio[1]:ARB:REFerence:EXTernal:FREQ
uency?
–
[:SOURce]:RADio[1]:ARB:REFerence[:SOURce]
INTernal|EXTernal
[:SOURce]:RADio[1]:ARB:REFerence[:SOURce]?
✓
[:SOURce]:RADio[1]:ARB:RETRigger
ON|OFF|IMMediate
[:SOURce]:RADio[1]:ARB:RETRigger?
✓
[:SOURce]:RADio[1]:ARB:RSCaling <1%-100%>
[:SOURce]:RADio[1]:ARB:RSCaling?
✓
[:SOURce]:RADio[1]:ARB:SCALing
"filename",<1%-100%>
✓
[:SOURce]:RADio[1]:ARB:SCLock:RATE <1Hz -
100MHz {100MHz}>
[:SOURce]:RADio[1]:ARB:SCLock:RATE?
✓ Agilent MXG range is 1 kHz – 125 MHz with
a default of 125 MHz.
[:SOURce]:RADio[1]:ARB:SEQuence[:MWAVeform]
<filename>,<waveform>,<reps>,NONE|M1|M2|M3|M4|
M1M2|M1M3|M1M4|M2M3|M2M4|M3M4|M1M2M3|M1M2M4|M1
M3M4|M2M3M4|M1M2M3M4|ALL,{,<waveform>,<reps>,N
ONE|M1|M2|M3|M4|M1M2|M1M3|M1M4|M2M3|M2M4|M3M4|
M1M2M3|M1M2M4|M1M3M4|M2M3M4|M1M2M3M4|ALL,}
[:SOURce]:RADio[1]:ARB:SEQuence[:MWAVeform]?
<filename>
✓
Table 6-2 E4428C/38C Program Codes and Equivalent SCPI Sequences
3 = Supported by Agilent MXG
– = Not supported by Agilent MXG
N51xxA
Remarks