Agilent N5181A/82A MXG Signal Generators SCPI Command Reference 231
SCPI Compatibility
8648A/B/C/D Compatible Commands
[:SOURce]:PULM:STATe ON|OFF
[:SOURce]:PULM:STATe?
✓
[:SOURce]:INITiate:IMMediate ✓ Supported but without the [:SOURce]
command. Including :SOUR will generate an
“Error –113: Undefined header” on the
Agilent MXG.
[:SOURce]:ABORt ✓ Supported but without the [:SOURce]
command. Including :SOUR will generate an
“Error –113: Undefined header” on the
Agilent MXG.
[:SOURce]:TRIGger:COUNt <value>
[:SOURce]:TRIGger:COUNt?
–
[:SOURce]:DM:FORMat FSK2|FSK4
[:SOURce]:DM:FORMat?
–
[:SOURce]:DM:STATe ON|OFF
[:SOURce]:DM:STATe?
–
[:SOURce]:DM:DEViation <value>
[:SOURce]:DM:DEViation?
–
[:SOURce]:DM:POLarity NORMal|INVert
[:SOURce]:DM:POLarity?
–
[:SOURce]:DM:FILTer:STATe ON|OFF
[:SOURce]:DM:FILTer:STATe?
–
[:SOURce]:PAGing:SELect
POCS|FLEX|FTD|RESY|PN15
[:SOURce]:PAGing:SELect?
–
[:SOURce]:PAGing:{POCS|FLEX|FTD|PN15}:RATE
<value>
[:SOURce]:PAGing:{POCS|FLEX|FTD|PN15}:RATE?
–
[:SOURce]:PAGing:{POCS|FLEX|FTD}:MESSage:SELec
t <value>
[:SOURce]:PAGing:{POCS|FLEX|FTD}:MESSage:SELec
t?
–
Table 6-3 8648A/B/C/D Program Codes and Equivalent SCPI Sequences
3 = Supported by Agilent MXG
– = Not supported by Agilent MXG
E44xxB
Remarks
To Next Page
Loading...
