Akai MPC 4000 User Manual

Edit page
145
FLANGER>PAN
This is an effect in which the effect sound of a monaural flanger is auto-panned (the
sound image will automatically move between left and right).
FLANGER>STEREO
This is a spacious flanger effect with stereo output.
FLANGER>XOVER (Flanger > Crossover)
This is a variation of the stereo flanger. The difference is that the feedback sound of the
L and R channels is returned to the opposite channel.
FLANGER+DELAY
This is a monaural composite effect that connects a flanger and a delay in series.
Parameter Range Function
Rate 0.1Hz–10.0Hz Adjusts the LFO speed.
Depth 0–127 Adjusts the LFO depth.
FB Invert ON/OFF Inverts (ON) the phase of the feedback signal.
Feedback 0–127 Adjusts the amount of feedback.
Width 0–127 Adjusts the width of panning.
Wet/Dry 100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect ON/OFF Switches the effect on/off.
Parameter Range Function
Rate 0.1Hz–10.0Hz Adjusts the LFO speed.
Depth 0–127 Adjusts the LFO depth.
FB Invert ON/OFF Inverts (ON) the phase of the feedback signal.
Feedback 0–127 Adjusts the amount of feedback.
Width 0–127 Adjusts the stereo width.
Wet/Dry 100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect ON/OFF Switches the effect on/off.
Parameter Range Function
Rate 0.1Hz–10.0Hz Adjusts the LFO speed.
Depth 0–127 Adjusts the LFO depth.
FB Invert ON/OFF Inverts (ON) the phase of the feedback signal.
Feedback 0–127 Adjusts the amount of feedback.
Width 0–127 Adjusts the stereo width.
Wet/Dry 100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect ON/OFF Switches the effect on/off.
Parameter Range Function
Rate 0.1Hz–10.0Hz Adjusts the LFO speed of the flanger effect.
Depth 0–127 Adjusts the LFO depth of the flanger effect.
Feedback 0–127 Adjusts the feedback amount for the flanger effect.
Delay 1ms–1500ms Adjusts the delay time of the delay effect.
Feedback 0–127 Adjusts the feedback amount of the delay effect.
Bounce ON/OFF Specifies whether the delay sound will be panned (ON).
Wet/Dry 100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect ON/OFF Switches the effect on/off.

Akai MPC 4000 Specifications

General

Polyphony	64 voices
RAM	272 MB (expandable to 512 MB)
Pads	16 velocity and pressure-sensitive pads
MIDI	2 MIDI inputs, 4 MIDI outputs
Sampling Frequency	44.1 kHz
Display	240x64 backlit LCD
Effects	4 internal effects processors
Storage	Internal Hard Drive
Sequencer	300, 000 notes capacity
Filter	Multi-mode filter (Low Pass, High Pass, Band Pass, Band Boost, Band Reject)