Edit page
147
PHASER>MONO
This is a conventional phaser effect. The effect itself is mono-in/mono-out, but you can
adjust the panning of the effect sound if you are playing in stereo.
PHASER>PAN
This effect auto-pans the phaser effect sound.
PHASER>STEREO
This is a stereo-output phaser effect that creates a spacious feeling.
PHASER>XOVER (Phaser > Crossover)
This is a variation of the stereo phaser. The difference is that the L and R channel feed-
back is returned to the opposite channel.
Parameter Range Function
Rate 0.1Hz–10.0Hz Adjusts the LFO speed.
Depth 0–127 Adjusts the LFO depth.
Feedback 0–127 Adjusts the amount of feedback.
Pan L63–MID–R63 Adjusts the panning of the effect sound.
Wet/Dry 100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect ON/OFF Switches the effect on/off.
Parameter Range Function
Rate 0.1Hz–10.0Hz Adjusts the LFO speed.
Depth 0–127 Adjusts the LFO depth.
Feedback 0–127 Adjusts the amount of feedback.
Width 0–127 Adjusts the width of panning.
Wet/Dry 100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect ON/OFF Switches the effect on/off.
Parameter Range Function
Rate 0.1Hz–10.0Hz Adjusts the LFO speed.
Depth 0–127 Adjusts the LFO depth.
Feedback 0–127 Adjusts the amount of feedback.
Width 0–127 Adjusts the stereo spread.
Wet/Dry 100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect ON/OFF Switches the effect on/off.
Parameter Range Function
Rate 0.1Hz–10.0Hz Adjusts the LFO speed.
Depth 0–127 Adjusts the LFO depth.
Feedback 0–127 Adjusts the amount of feedback.
Width 0–127 Adjusts the stereo spread.
Wet/Dry 100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect ON/OFF Switches the effect on/off.