Effect mode
148
PHASER+DELAY
This is a monaural composite effect that connects a phaser and delay in series.
PITCH CORRECTOR
This monaural effect corrects the pitch of the input signal in realtime.
* About the Scale parameter
The following scales can be selected for the Scale parameter.
Parameter Range Function
Rate
0.1Hz–10.0Hz Adjusts the LFO speed of the phaser effect.
Depth
0–127 Adjusts the LFO depth of the phaser effect.
Feedback
0–127 Adjusts the amount of feedback for the phaser effect.
Delay
1ms–1500ms Adjusts the delay time of the delay effect.
Feedback
0–127 Adjusts the amount of feedback for the delay effect.
Bounce
ON/OFF Specifies whether the delay sound will be panned (ON).
Wet/Dry
100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect
ON/OFF Switches the effect on/off.
Parameter Range Function
Ratio
0%–100%
Adjusts the degree to which a pitch that falls outside the thresh-
old will be corrected.
Smoothing
0%–100%
Preserves the vibrato of the input signal in order to maintain a
more natural-sounding result.
Calibration
415Hz–466Hz
No vibrato will remain if this is set to 100%. As you decrease
the setting, a more natural vibrato will appear.
Scale
*
Specifies the standard pitch.
Key
C/C#...A#/B Selects the scale that will be used.
Wet/Dry
100/0–0/100
Adjusts the balance of the effect sound and dry sound. (With a
setting of 100/0, only the effect sound is output.)
Effect
ON/OFF Switches the effect on/off.
CHROMA (Chromatic scale)
M (Major scale)
m (Minor scale)
m-HERM (Harmonic minor scale)
m-MELO (Melodic minor scale)
WHOLE (Whole tone scale)
BLUES (Blues scale)
ARAB (Arabian scale)
DORIAN (Dorian scale)
PHRYGI (Phrygian scale)
LYDIAN (Lydian scale)
MIXOLY (Mixolydian scale)
LOCRIA (Locrian scale)
Scale parameter settings
CDEFGAB
To Next Page
Loading...
Need help?
General
