HUNTING GROUPS CALL SERVER : TELEPHONE FEATURES
Ed. 042/4 Réf. 3EH 21000 BSAA
T To authorize the immediate group forwarding or withdrawal (see "Forwarding") of group calls from
the last member of a group (only with MMC-PM5 (Expert View)):
T Defining the dynamic routing parameters of a group:
T To authorize external calls to camp on the group, (MMC-PM5 only):
T To define the response in the event of failure – MMC-PM5 (Expert View) only:
T To define whether the Hunting Group is still considered free, depending on its status:
System Miscellaneous -> Feature Design ->"Disconnect Last Group Member Allowed"
- by MMC-PM5 (Expert View): Hunting Groups -> Dyn. Rout.
-by MMC-Station: Groups -> Hunt -> DynRou
- call arriving on an analog interface (TL, ATL, DDI, etc):
External Lines -> Protocols -> Parameters -> "Ringing Mandatory": deselect the box to
authorize holding
- call arriving on a digital interface (T0, T2, etc) :
System Miscellaneous -> Feature Design -> "Call waiting/Automatic Camp-on": select
the box to authorize camp-on
- call arriving on an analog interface (TL, ATL, DDI, etc):
External Lines -> Protocols -> Parameters -> from "Reaction on missing incoming digit"
to "Reaction on out of service"
- call arriving on a digital interface (T0, T2, etc):
External Lines -> Incoming Call Handling
- by MMC-PM5 (Expert View):
System Miscellaneous -> Memory Read/Write -> Misc. Labels -> "BusyGrpInd"
-by MMC-Station:
Global -> Rd/Wr -> Address -> "BusyGrpInd" -> Return -> Memory
To Next Page
Loading...
