Alcatel OmniPCX Office Technical Documentation

22
DISAMMC STATION
Ed. 04 1/2Réf. 3EH 21000 BSAA
File
DISA
This function is used to define the various parameters necessary for analog DISA and DISA transit ser-
vices.
Press .
ANALOG DISA - ANALOG
Press .
by successively pressing this key, it is possible to select the message transmitted during a DISA
call on an analog line: Msg1 to Msg8.
DISA TRANSIT - TRANSI
Press .
makes it possible to modify the personal code for accessing the DISA transit service. Enter the
current code then the new code and validate.
by successively pressing this key, it is possible to define the system response in the case of an
unavailable MF receiver for a DISA transit call: camp-on authorized or call failure and redistribution.
by successively pressing this key, it is possible to select the message transmitted during a DISA
transit call: Msg1 to Msg8.
makes it possible to reset the DISA service access control code.
makes it possible to reset the DISA call failure counter (this counter's value is not displayed).
DISA
PASSWD
DISA service access control code (up to 16 characters)
Await DTMF receiver
DISA message number
WTDTMF
MSG
TRANSI
MSG
Message for DISA on analog lines
ANALOG
Analog DISA
DISA Transit
RESCOD
Reset code
RESCNT
Reset DISA call failure counter
DI
S
A
ANAL
OG
MSG
TRAN
S
I
PA
SS
WD
WTDTMF
MSG
RE
SCO
D
RE
SC
NT

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing