39
MAIN PABX RECALLCALL SERVER : TELEPHONE FEATURES
Ed. 04 1/2Réf. 3EH 21000 BSAA
File
MAIN PABX RECALL
DESCRIPTION
If a user wishes to use the services offered by the analog network operator, he must transmit a calibra-
ted loopbreak over the line.
This procedure must also be followed when the system is connected to a PABX of larger capacity via
analog network lines.
CONFIGURATION
T For each analog network line, configure the value of the calibrated loopbreak using MMC-PM5
Expert View (only):
T To modify the default value for the activation of the time-out for the calibrated loopbreak if no fi-
gure has been transmitted:
ACTIVATION/USE
P.K.: Programmed Key – defined by MMC-PM5 (Expert View) or MMC-Station
F.K.: Fixed Key
S.K.: Soft Key
Code: Code programmed in the "Features in Conversation" table
(*) the system then transmits a main PABX recall to the local PABX and the following digits.
External Lines -> List of Accesses -> Details -> "Cut off Type"
-by MMC-PM5 System Miscellaneous -> Memory Read/Write -> Misc. Labels -> "IntClLp-
Tim"
- by MMC-Station: Global -> Rd/Wr -> Address -> "IntClLpTim" -> Return -> Memory
Type of station Z Without display With display, no soft
keys
With soft keys
Main PABX recall F.K.: R. + Code (*) P.K.: Main PABX re-
call (*)
P.K.:
oPBX. (*) S.K.: oPBX. (*)
To Next Page
Loading...
Need help?
General