Alcatel OmniPCX Office Technical Documentation

1
GENERALMMC STATION
Ed. 04 1/6Réf. 3EH 21000 BSAA
File
GENERAL
The Man-Machine Conversation (MMC) by 4034/Advanced station enables modification of the para-
meters of the different system elements.
Notas :
- only a single 4034/Advanced station can be in MMC at a given moment.
- simultaneous access to the MMC by station and by PC is impossible.
The modifications are made in 2 ways:
- By introducing a numeric value (number of the station for example) or an alphanumeric value.
- By choosing one of the predefined values presented on the display using the soft keys.
ACCESS TO THE MMC
Access to the MMC is enabled by:
- entering the code 70 (by default) or by using a key programmed with this code, or by pressing the
key (Advanced station).
- choosing the session: 3 sessions are offered: INSTALLER ( key), ADMINISTRATOR ( key)
and OPERATOR * ( key). These different levels of access to the parameterizable features thus
enable modifications to be authorized to cleared people only.
- entering the password corresponding to the chosen session.
Notas : * Only Installer and Administrator sessions are presented in this notice; for the Operator
session, refer to the Installation guide.
Password default values
S
Y
S
TEM
IN
S
TAL ADMIN
OPERAT
INSTALLER session
ADMINISTRATOR session
pbxk1064
kilo1987

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing