Alcatel OmniPCX Office Technical Documentation

3
DOORPHONESAPPLICATIONS
Ed. 04 1/8Réf. 3EH 21000 BSAA
File
DOORPHONES
DESCRIPTION
With the doorphone, it is possible to identify the person who has pressed the button before opening
the door. Identification is made after a communication has been set up between a set connected to the
system and the doorphone.
2 doorphone types are available, depending on the operating mode used:
- Type A: relay-controlled doorphones (e.g. NPTT)
- Type B: doorphones controlled by MF Q23 signals (e.g. TELEMINI and UNIVERSAL DOORPHONE)
These doorphones are mutually exclusive on the same system. A flag must be placed to define the
operating mode in use.
A doorphone call is managed in the same way as all internal calls:
- it is indicated on the destination set display as another call
- a doorphone call may be intercepted, forwarded, put in a conference with other correspondents
and camped on if the destination set is busy.
Notas :
The destination of a doorphone call can be an external number (defined using a collective speed dial
number); in this case, the set in question cannot control the door opening mechanism.
By MMC-PM5 (Expert View), select:
System Miscellaneous -> Memory Read/Write -> Misc. Labels -> flag DPHMode -> enter 00
(default value) for a TELEMINI or UNIVERSAL DOORPHONE or 01 for an NPTT doorphone.
Station o
r
operator
ALCATEL
BUSINESS
SYSTEMS
Alcatel
OmniPCX
Office

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing