Alcatel OmniPCX Office Technical Documentation

4
GENERAL COMMANDSMMC STATION
Ed. 04 1/8Réf. 3EH 21000 BSAA
File
GENERAL COMMANDS
This function is used for defining general elements which are common to the whole system.
Previous password
A
New password
No conference
Conference with up to 1 TL
Conference with up to 2 TL
ADMINISTRATOR default password
OPERATOR default password
History reading
Reading of the system message table
Resetting of the system message table
INTERNTL PREFIX
AREA PREFIX
CALL-BACK PREFIX
International prefix
Area prefix
Call-back number
Call-back from the operator or initiator of the transfer if a transfer fails
GLOBAL
CONF
PASSWD
MAINTE
NUMPFX
MASREC
NOCONF
ONEEXT
2 EXT
RESADM
RESOPE
NEWPWD
RDHIST
RDANOM
RRANOM
CHOICE
RAM memory read/write
RD/WR
MEMORY
ADDRES
TIMER
L1ALAR
RESALL
Reading
Slot number, equipment
number or logical number
Reading and resetting of T1/T2/DLT2
alarm counters
Modification of the
INSTALLER password

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing