Alcatel OmniPCX Office Technical Documentation

7
ANALOG LINES AND DIGITAL
ACCESSES
MMC STATION
Ed. 04 1/4Réf. 3EH 21000 BSAA
File
ANALOG LINES AND DIGITAL
ACCESSES
This function is used to define the characteristics of the analog lines (possibility provided from version
R1.1 onwards) and T0/T2/DLT2 digital accesses.
Access identification
TL connection (incoming, outgoing, mixed, PABX)
Decadic or DTMF dialling
With or without polarity reversal
Switched on
Switched off
INSERV
OUTOFS
if analog
if digital access
Call destination in normal and
restricted mode (DDI No.)
Switched off
INSERV
OUTOFS
Incoming
Outgoing
To ta l
Paging connection interface
Normal
Restricted
Normal
Restricted
A
B
B_CHAN
DIRECT
NUMBER
POLARI
PAGING
ACCESS
OUTINS
CALDIS
OUTINS
CALDIS
Line used for DISA transit calls
DISA
Protection against DDC calls
DDCPRO
NNV, RNV, NV, RV: barring link category
CATEGO
N, R: traffic sharing link category
REPENT
REPENT
NNV, RNV, NV, RV: barring link category
CATEGO
N, R: traffic sharing link category
Call destination in normal and
restricted mode (DDI No.)
NNV, RNV, NV, RV: collective speed dial rights
(access to collective speed dial numbers)
NNV, RNV, NV, RV: collective speed dial rights
(access to collective speed dial numbers)
Number of incoming, outgoing channels,
total number of channels
Switched on

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing