5
CALL METERING SERVICESAPPLICATIONS
Ed. 04 1/30Réf. 3EH 21000 BSAA
File
CALL METERING SERVICES
The CALL METERING module is used for collecting specific information concerning telephone commu-
nications and printing this information in various formats, depending on the type of management se-
lected.
This section describes the implementation and use of call metering statements or tickets; these can be
printed on any printer connected to a V24 4083 ASM or 4093 ASY-CTI option on a Reflexes terminal.
It is also possible to display data relating to communication.
Nota : Not all the metering information supplied by the ISVPN+ protocol (operator, node,
services: transit, overflow, ARS, etc.) appears on the tickets; this data can only be
used from within a central management application (Alcatel 4740 or other).
V24 metering printout:
T Metering printout parameters: format (information bits, parity, stop bits) and speed; by default:
8N1, 9600 bps).
T Activating external metering: printing of tickets/statements is or is not activated (default setting)
Nota : The details on configuring the V24 metering printout can be found in the "Annexes" section.
- By MMC-PM5 (Expert View), select: Subscribers/Basestations List -> Subscribers/Basesta-
tions List -> select V24 access -> Details -> V24
- By MMC-PM5 (Expert View), select: Metering -> Metering -> Printouts->check External Me-
tering Activation
To Next Page
Loading...
Need help?
General