18
SPECIFIC FEATURES OF SO STATIONSCALL SERVER : TELEPHONE FEATURES
Ed. 04 1/2Réf. 3EH 21000 BSAA
File
SPECIFIC FEATURES OF SO STATIONS
DESCRIPTION
The PABX provides the following services for S0 stations:
- suspension, which consists in suspending an internal or external communication in progress on a
basic access and picking it up later from the same S0 station relocated on the basic access or ano-
ther S0 station connected to the same basic access. The communication can be identified by a code
before being suspended. This code is used to locate the call.
- call waiting, which enables an S0 station to be informed that an external call is intended for it even
if no B channel is available on its basic access. The S0 station can ignore, reject or accept the call.
- malicious call identification subscription so that the network operator can be asked to record the
caller's identity during the communication or for a programmable time after going on hook.
- forwarding of calls on no answer, enables the internal and/or external calls to be routed to the
programmed destination.
CONFIGURATION
T To modify the default maximum suspension time-out – MMC-PM5 (Expert View) only:
T To authorize or inhibit camp-on on S0 stations – MMC-PM5 (Expert View) only:
T To modify the maximum time-out, after going on hook, for requesting recording of the caller's iden-
tity – MMC-PM5 (Expert View) only:
System Miscellaneous -> Feature Design -> Part 3 -> "Suspension"
System Miscellaneous -> Feature Design -> "Call Waiting/Automatic camp-on"
External Lines -> Protocols -> ISDN Trunk -> Layer 3 -> "T305 Disconnect Supervision"
To Next Page
Loading...
