Alcatel OmniPCX Office - MOVING OF 2 STATIONS

21
MOVING OF 2 STATIONSMMC STATION
Ed. 04 1/2Réf. 3EH 21000 BSAA
File
MOVING OF 2 STATIONS
This function is used to move the physical addresses of 2 stations of the same family.
Press .
Enter the directory number of station 1 (source station).
Enter the directory number of station 2 (destination station).
Follow this moving procedure:
- press : the 2 stations are put out of service and logically moved.
- physically move the 2 stations.
- press : the 2 stations are put back in service.
Backup:
- 2 stations switched off
Station 1
- logical moving of 2 stations
Physical moving of 2 stations
Station 2
Restoration
- 2 stations switched on again
MOVING
SAVING
RESTOR
MOVING
S
AVIN
G
RE
S
T
O
R