Alcatel OmniPCX Office Technical Documentation

3
REPLACING/RELOCATING SETSMAINTENANCE
Ed. 04 1/4Réf. 3EH 21000 BSAA
File
REPLACING/RELOCATING SETS
REPLACING A SET
You can replace your Reflexes set by connecting a set of the same family, but of a different type, into
your phone socket. This substitution can be temporary or permanent.
Replacing an analog set by another analog set, or replacing a Reflexes set by a set of the same type,
requires no special procedure (simple hardware exchange).
Temporary substitution
The replacement set keeps its own default functions (customized settings are not transferred). The data
not transferred are stored in the Alcatel OmniPCX Office system until a set of the same type as the
initial one is connected.
Permanent replacement
The maximum quantity of data from the initial set is transferred to the replacement. Data not transfer-
red are deleted.
Unplug Plug in Plug inUnplug
Defective
terminal
Repaired
terminal
Replacement
terminal
Y
our term
i
na
l
i
s unserv
i
cea
bl
e
Y
our term
i
na
l
i
s repa
i
re
d
Replacement
terminal
Unplug Plug in
Defective
terminal
Replacement
terminal
"Terminal replacement"
code + password

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing