5
FAST IP REFLEXES TERMINALSTERMINALS
Ed. 04 1/2Réf. 3EH 21000 BSAA
File
FAST IP REFLEXES TERMINALS
Fast IP Reflexes terminals are Reflexes sets with a 4098 FRE ("IP Enabler") module. There are two mo-
dels:
- Fast IP Advanced Reflexes / 4037F
- Fast IP Premium Reflexes / 4022F
Characteristics
- The IP Enabler is connected to the LAN via an RJ45 connector (10 Mbps Ethernet link for IP Enabler
V1.0 and 10/100 Mbps for IP Enabler V1.5).
- The module is initialized in dynamic (DHCP) or static IP address mode by downloading the binary
into the IP Enabler from the master VoIP CoCPU board, which is treated as a TFTP server.
- The IP Enabler is then recognized by the PABX as a Reflexes terminal in its own right. Voice and
signal data are encapsulated in UDP packets, enabling the "e-Reflexes" terminal to communicate
with any other type of terminal: Reflexes, DECT handsets, analog sets, other e-Reflexes, H.323 ter-
minals or gateways (e.g. PC NetMeeting), PIMphony IP Edition, networks, etc.
PC LAN
PC LAN CPU
UA
LAN
IP ENABLER
4098 FRE
Mains power
To Next Page
Loading...
Need help?
General