Alcatel OmniPCX Office Technical Documentation

18
PRE-ANNOUNCEMENT MESSAGESMMC STATION
Ed. 04 1/2Réf. 3EH 21000 BSAA
File
PRE-ANNOUNCEMENT MESSAGES
This function makes it possible to assign up to eight 16-second welcome messages to stations or hun-
ting groups (up to 15 entries with DDI numbers + 1 entry corresponding to all stations and hunting
groups) with validity according to the time ranges.
Press .
After pressing or :
makes it possible to choose the operating mode (OFF, MODE1, MODE2, MODE1 BUSY or
MODE2 BUSY).
- MODE 1: the external correspondent hears the message from start to finish then the called station
is rung.
- MODE 2: the external correspondent hears the message while the called station is being rung.
- MODE 1 BUSY: message broadcasted in mode 1 only if the station or hunting group is busy.
- MODE 2 BUSY: message broadcasted in mode 2 only if the station or hunting group is busy.
- OFF: no access to welcome message
makes it possible to choose the welcome message: Msg 1 to Msg 8.
makes it possible to choose the time range (the starting time for the range is displayed).
makes it possible to delete the data from the selected entry.
makes it possible to delete all the entries in the table.
Deletion of an entry
PREANN
CLEAR
ADD
MODIFY
Modification of the current entry
MODE
MSG
Destination
Operating mode
Choice of welcome message
Deletion of all data in the table
DELALL
NEXT
Next time range
PREANN
ADD
MODIFY
MODE
MSG
NEXT
CLEAR
DELALL

Alcatel OmniPCX Office Specifications

General

VoIP Support	Yes
SIP Support	Yes
ISDN Support	Yes
Analog Support	Yes
Integrated Voice Mail	Yes
Auto Attendant	Yes
Conferencing	Yes
VoIP Protocols	SIP, H.323
Power Supply	100-240 VAC, 50/60 Hz
Network Interfaces	10/100 Mbps Ethernet
Humidity	10% to 90% non-condensing