Alcatel OmniPCX Office - HUNTING GROUPS

3
HUNTING GROUPSCALL SERVER : TELEPHONE FEATURES
Ed. 04 1/4Réf. 3EH 21000 BSAA
File
HUNTING GROUPS
DESCRIPTION
Creating Hunting Groups makes it possible to call several stations using a single directory number; a
single member of the group answers the call for the whole group.
Each group has:
- a directory number defined in the main numbering plan
- a parallel, cyclic or sequential management type
- an operation type, either "setup" (without supervision key, for calls destined for the group) or "si-
gnaling" (with supervision key)
CONFIGURATION
T Configuring the groups:
T Defining the group management type:
T To select the operating mode for (hunting AND operator) groups: with or without a "Group Super-
vision" programmed key:
T Programming the "group supervision" keys on each station (one for every group to which the station
belongs):
- by MMC-PM5 (Expert View): Hunting Groups
- by MMC-Station: Groups -> Subscr.
- by MMC-PM5 (Expert View): Hunting Groups
- by MMC-Station: Groups -> Subscr.
- by MMC-PM5 (Expert View):
System Miscellaneous -> Feature Design -> Group called with signalisation mode
- by MMC-PM5 (Expert View): Subscribers/Basestations List -> Subscribers/Basestations List
-> Details -> Keys
- by MMC-Station: Subscr -> Keys