File
11
NORMAL AND RESTRICTED SERVICECALL SERVER : TELEPHONE FEATURES
Ed. 04 3/6Réf. 3EH 21000 BSAA
FORWARDING OF ALL EXTERNAL INCOMING CALLS
The system is made up of two public numbering plans, one of which is used in normal service while
the other is used in restricted service.
The restricted public numbering plan can be configured in such a way that certain DDI numbers are
redirected to external destinations (using the group directory or the ARS mechanism) while others (Fax
for example) reach their intended internal destinations.
Configuring the public numbering plan in restricted mode
The public numbering plan for restricted service mode can contain a maximum of 99 entries (0 by de-
fault).
The configuration (beginning and end of range, base, NMT) is identical to that of the public numbering
plan for normal service mode (PubNum).
If the destination of the DDI number is the same in normal and in restricted service, the 2 numbering
plans must have the same configurations.
For more details, see "Numbering Plans" in the MMC-Station section.
Activation/Deactivation
Forwarding can be activated/deactivated from any station with an N/R Mode key. After pressing this
key, dial the operator code.
Notas :
It can also be activated by configuring the time ranges.
Example of use
Normal service public numbering plan
- by MMC-PM5 (Expert View): Numbering -> Restricted numbering plan
- by MMC-Station: NumPln -> ResNum
Begin End Base Function
120 170 120 Station
200 230 200 Station
500 525 500 Hunting Group
To Next Page
Loading...
Need help?
General