ISDN SERVICES CALL SERVER : TELEPHONE FEATURES
Ed. 042/4 Réf. 3EH 21000 BSAA
T For each station, to specify whether or not to authorize reception of User to User Signaling:
T To modify the maximum time-out, after going on hook, for requesting recording of the caller's iden-
tity – MMC-PM5 (Expert View) only:
ACTIVATION/USE
P.K.: Programmed Key – defined by MMC-PM5 (Expert View) or MMC-Station
F.K.: Fixed Key
S.K.: Soft Key
(*) Messages 1 to 27 are pre-defined in the system. Some of them have a variable part which must be
completed (return time, room number, etc.). Message n° "0" can be made up completely from the al-
phabetic keypad (up to 32 characters).
- by MMC-PM5 (Expert View): Subscribers/Basestations List -> Subscribers/Basestations List
-> Details -> Features -> "UUS Allowed"
External Lines -> Protocols -> ISDN Trunk -> Layer 3 -> "T305 Disconnect Supervision"
ZWithout
display
With display, no soft
keys
With soft keys
Activate calling line identification restriction before dia-
ling, in sequential or block dialing modes
-- P.K.: CLIR P.K.: CLIR P.K.: CLIR
Switch to block dialing mode -- -- F.K.: ISDN or P.K.:
BMdial
F.K.: ISDN
Delete digit preceding the cursor in block mode dialing
(number and sub-address)
F.K.: Mute S.K.: Rubout
Add a sub-address in block dialing mode -- -- P.K.: SubAdd S.K.: SubAdd
To validate the sub-address, in block dialing mode -- -- P.K.: SubAdd S.K.: OK
Add UUS, in block dialing mode -- -- -- S.K.: Text + n° of messa-
ge (from 0 to 27) (*)
Activation of calling line identification restriction, in
block dialing mode
-- -- -- S.K.: Secret
To set up the call in block dialing mode (with or without
sub-address, with or without UUS).
-- -- F.K.: ISDN or P.K.:
BMdial
S.K.: Send
Activate malicious call identification Function code S.K.: MCID
Type of station
Service
To Next Page
Loading...
Need help?
General