BUSY GREETING ON VOICE MAILBOX CALL SERVER : TELEPHONE FEATURES
Ed. 042/2 Réf. 3EH 21000 BSAA
ADDITIONAL INFORMATION
Summary table
Call forwarding
Routing to a voice mailbox is not performed if the user called has programmed the forward function
on his/her set. The service becomes valid when the forward function is cancelled.
Forward on busy
If the user has programmed his/her voice mailbox as the destination of Call forwarding on busy, the
internal or external caller will also hear the message.
Default value
After a cold reset, the "DynRoutBsy" flag is set to 0 (service inactive) by default and set-by-set activation
is cancelled (active in France).
Attention :
The mechanism is also active if the destination of T1 dynamic routing is a set instead of the VMU. In
this case, the destination of dynamic routing will be rung immediately if the set called is busy.
There is no indication of service activation on the sets.
Service active (flag DynRoutBsy = 1) Service inactive (flag
DynRoutBsy = 0)
Called party busy Called party free
Routing to voice mail-
box
IMMEDIATE NO NO
Level 1 dynamic routing Does not start T1 timer T1 timer
Level 2 dynamic routing Does not start T2 timer T2 timer
To Next Page
Loading...
Need help?
General