File
26
THREE PARTY CALLSCALL SERVER : TELEPHONE FEATURES
Ed. 04 3/6Réf. 3EH 21000 BSAA
T For the system as a whole, to authorize or inhibit the transfer of incoming or outgoing trunk lines
to an outgoing network line (be careful with subscriber rights and trunk group link categories):
T To authorize transfer of an incoming or outgoing network line to an outgoing network line, for each
station:
T To define the type of system reaction in the event of transfer failure (operator or initiator recall, also
called "transfer master"):
T Modify the implicit value of the rerouting time-out at general level in the event of transfer failure:
T Authorize connection of two external lines by transfer (connection matrix):
T To specify whether or not to authorize transfer by going on-hook with a multiline station:
T To specify whether or not to authorize Ext/Ext transfer (intersite transfers) by going on-hook with a
Z station:
- by MMC-PM5 (Expert View): System Miscellaneous -> Feature Design -> "Transfer Ext/Ext"
- by MMC-Station: Global -> Joing -> Transf
- by MMC-PM5 (Expert View): Subscribers/Basestations List -> Subscribers/Basestations List
-> Details -> Features -> Part 2 -> "Join Incoming and Outgoing" and "Join Outgoing
and Outgoing"
- by MMC-PM5 (Expert View): System Miscellaneous -> Feature Design -> "Go to initiator if
transfer fails"
- by MMC-Station: Global -> MasRec -> Choice
-by MMC-PM5 System Miscellaneous -> Memory Read/Write -> Timer Labels -> "Transfe-
Tim"
- by MMC-Station: Global -> Rd/Wr -> Timer -> "TransfeTim" -> Return -> Memory
Traffic Sharing and Barring -> Joining
- by MMC-PM5 (Expert View): System Miscellaneous -> Feature Design -> Transfer by on
hook
- by MMC-PM5 (Expert View): System Miscellaneous -> Feature Design -> Transfer Ext/Ext
by on hook
To Next Page
Loading...
Need help?
General