CALL PICK-UP CALL SERVER : TELEPHONE FEATURES
Ed. 042/2 Réf. 3EH 21000 BSAA
ACTIVATION/USE
P.K.: Programmed Key – defined by MMC-PM5 (Expert View) or MMC-Station
S.K.: Soft Key
Prefix: Code programmed in the internal numbering plan
(*) If the pick-up is accepted, the user converses with the caller, if not, he hears the fast busy tone.
ADDITIONAL INFORMATION
- A private subscriber can only pick up internal calls.
- A private call cannot be picked up.
- A call intended for a Hunting Group with cyclic or sequential management (see section "system fea-
tures" file "Hunting Groups") can be picked up like an individual pick-up.
- A call intended for a group of operator stations can only be picked up by individual pick-up.
- Prefixes for pick-up functions in the numbering plans: the basic value may vary depending on the
local software version. The French settings are as follows:
• Pick-up: base 0 = individual pick-up
• Pick-up: base 1 = group pick-up
- Pick-up: base 2 = general call pick-up
Multiline All stations (in-
cluding Z)
Without display
(≠ Z)
With display, no
soft keys
With soft keys
Individual pick-up (*) -- Code + n° of sta-
tion ringing
P.K.: Individual
pickup + n° of
station ringing
P.K.: IndPic + n°
of station ringing
S.K.: Pickup +
S.K.: IndPic + n°
of station ringing
Group pick-up (*) -- Prefix P.K.: Group
pick-up
P.K.: GrpPic S.K.: Pickup +
S.K.: GrpPic
General call answer (*) -- Prefix P.K.: General
Call Answer
P.K.: GenBel S.K.: Pickup +
S.K.: GenBel
Type of service
Type of station
To Next Page
Loading...
