File
44
APPOINTMENT REMINDER/WAKE-UP
CALL
CALL SERVER : TELEPHONE FEATURES
Ed. 04 3/4Réf. 3EH 21000 BSAA
ACTIVATION/USE
At the appointment or wake-up time, the station rings and the display shows the appointment.
Ringing stops when the user acknowledges the appointment reminder or wake-up call, for example by
going off hook. If there is no acknowledgement, the station rings for 15 seconds (default setting) and
then again one minute later (also by default) and then a third time (by default) after a further minute.
Whether acknowledged or not, a temporary appointment reminder or wake-up call is cancelled and
a permanent appointment reminder is retained for the following day at the same time.
CANCELLATION
S.K.: Soft Key
Prefix: Code programmed in the internal numbering plan
ADDITIONAL INFORMATION
- When the station is busy at the time the appointment reminder or wake-up call is made, the station
does not ring but the user hears a specific tone.
- To avoid traffic overload, stations that have placed wake-up call requests are called in groups of
5, with a default time lapse of 2 seconds between 2 groups
- Number of analog stations called simultaneously: maximum of 4 per SLI board
- You can consult the appointment reminder/wake-up call status for each station in: Subscribers/
Basestations List -> Details -> WakUp.
Without display With display, no soft keys With soft keys
Permanent appointment reminder -- Key i + function " Appmnt"
then function " Perm" + F.K.:
"Cancellation" + F.K.: "OK"
S.K.: Appmnt + S.K.: Perm
S.K.: Clear + S.K.: OK
Temporary appointment reminder Prefix Wake-up activation Key i + function " Appmnt"
then function " Temp" + F.K.:
"Cancellation" + F.K. "OK"
S.K.: Appmnt + S.K.: Temp +
S.K.: Clear + S.K.: OK
Type of statio
Service
To Next Page
Loading...
Need help?
General