METER TOTAL RECALL CALL SERVER : TELEPHONE FEATURES
Ed. 042/2 Réf. 3EH 21000 BSAA
ACTIVATION/USE
P.K.: Programmed Key – defined by MMC-PM5 (Expert View) or MMC-Station
S.K.: Soft Key
ADDITIONAL INFORMATION
- The recall is presented for 25 seconds ; if the recall is not acknowledged, the system temporarily
cancels the recall: it is presented again after any operation carried out on the station.
- If the destination station for the recall is busy, the metering information is temporarily displayed
and a sound signal is transmitted. As soon as it is free, the destination station for the recall should
receive the metering information.
- When a station is the destination for several meter total recalls, the one which has been there the
longest is presented first.
- The service can only be used on external lines providing metering information (hence, not on ana-
log ATLs).
- A meter total recall does not follow a call forwarding.
- A "meter total recall" can be combined with a "trunk allocation" (see corresponding file).
- The character "#" precedes the number of the metering ticket printed on a meter total recall.
Without display With display, no soft keys With display, with soft keys
Activating in manual mode, during
communication (local)
-- P.K.: MTR + external n° + F.K.: Transfer
Activating in manual mode, when
idle
-- P.K.: MTR + external n° then, when the outside party answers, internal
n° + F.K.: Transfer
Activating in automatic mode -- Automatic
During recall, reading the directory
n° of the "monitored" station
-- P.K.: Read + P.K.: Read + if required
Printing a metering ticket -- 2 S.K.: Print.
Stopping the ringer and keeping
the metering information on the
display
-- 1 S.K.: MTR-OK
Acknowledging the meter total re-
call
-- 1 S.K.: MTR-OK
ype o
stat
on
Service
To Next Page
Loading...
Need help?
General