File
5
IMPLEMENTING REFLEXES DECT SETSCALL SERVER : MOBILITY
Ed. 04 3/4Réf. 3EH 21000 BSAA
ting mode of Reflexes DECT sets).
- Avoid allocating Reflexes DECT sets to hunting groups; however, if the use of this type of set is ine-
vitable, limit their number to 4 per group.
- Number of Reflexes DECT sets in manager-secretary configurations: 4 manager sets and 4 secre-
tary sets.
- Do not allocate Reflexes DECT sets to broadcast groups.
- Do not use Reflexes DECT sets as call monitoring sets (selective or general) nor to monitor resour-
ces.
- Programming the RSP keys is impossible on Reflexes DECT sets.
- Status signaling (free or busy) for sets monitored on RSL keys is unavailable except for sets allocated
to manager-secretary configurations.
- Background music is not available on Reflexes DECT sets.
- After a time change made by MMC or after reception of the time sent by the public exchange, it is
possible that this modification will not be taken into account immediately by all the Reflexes DECT
sets; in this case, a simple user action (going off-hook, making a call, etc.) is enough to reset the
time synchronization on the display.
MOVING A REFLEXES DECT SET
To move a Reflexes DECT set, it is necessary to disconnect the mains power supply block before ins-
talling it in another place.
Reconnect the set for normal use (the set's number and programming will be kept).
Make sure the terminal is relocated in a zone with an adequate radio reception level, one that can
cope with the traffic requirements.
To Next Page
Loading...
Need help?
General